New Life for Old Furniture



If you own or come across an old piece of furniture that appears to be on its last legs, you may be inclined to throw it away. Like grandpa’s heavy old dresser that’s past its prime and only serves to occupy valuable garage space. However, although the wood may be dried and damaged, it may be revitalized. Even if you aren’t exactly a ‘Do-it-Yourselfer’, you can restore old furniture to its former glory with relative ease.


Initial Prep


Remove any handles, knobs, or any other accents that may be present. Proceed to wash the wood surfaces. You can use any regular dish detergent by dipping a sponge into soapy water and scrubbing, being sure to remove all dirt and foreign substances. Make it as clear as possible so that the new paint may best adhere. Then use a clean damp lint-free cloth for a final wipe-down. Take a break and let it sit for about six hours or until completely dry.


Sanding Smooth


Perform a thorough inspection, looking for prominent chips, dings and damage that you can repair with good wood filler. With a putty knife, spread away any excess before letting it dry. Use a fresh piece of sandpaper and smooth it all out. If you can determine the type of wood you’re working with, get sandpaper that is specifically designed for it. Otherwise, use a medium grit (100 – 140) and apply some real effort by sanding the piece until the entire surface is uniform, flush, and devoid of all old paint. There is a chance you could skip the sanding process entirely, if the furniture is mostly smooth to begin with. But for best results a little elbow grease goes a long way. Then, use masking tape to cover the hinges and any other spots that you intend to remain untouched from the paint.


With construction varying widely from simple to super-ornate, the Splatback always retains its general design. Between the left and right posts is a center piece that serves as the back support, extending from the seat to the chair’s top. It has been known to be used internationally during many periods and subsequently can be found in multiple themes, from gothic to Chinese. Despite these variants, it is considered an elegant design even in its most basic form.


Prime Time


Before painting, please be certain the space you’re working in is well-ventilated. You don’t want any noxious fumes having an adverse effect on your well-being. And before a brush touches the surface, there’s got to be priming. This will ensure a quality paint job that won’t chip or flake. Using a spray can apply a single, easy all-encompassing layer of primer, taking your time and covering all areas. Follow that with another evenly distributed coat and let dry 90 minutes before starting the last step.


Breathe & Brush


Mix the paint until it is at the preferred consistency. Stir if necessary. Pre-wash your brush to remove all dirt and tiny particles. With lengthy light-touch strokes, evenly apply the paint upon the surface. Be certain to cover any and all tiny crevices and carved décor. This is the first and perhaps only coat needed. Let it dry. If it is not as opaque as you prefer, add additional coats until it meets the desired shade.



Almost Finished!


Seal the deal with a waterproof sealer – choose one that provides excellent coverage and protection. This will help guard against damage from liquids, ash, and other unexpected encounters. Voilà! You now have a beautifully refurbished piece of furniture that was previously a lost cause! You may now pat yourself on the back for completing your very own DIY furniture project!


Contact Us

Email: info@el-mueble.com.mx
Celphone: (624) 355 46 34

Open Hours

Daily: 10.00 AM 6.00 PM
Saturday: 10.00 AM 3.00 PM
Sunday & Holidays: Closed.

Find Location

Carretera Transpeninsular Km 0.5,
Plaza San Lucas (Walmart), El Tezal,
CP 23454, Cabo San Lucas, Mexico.

View Map

2020 El Mueble - All rights reserved.